LAN Devices

Devices commonly used in LANs include repeaters, hubs, LAN extenders, bridges, LAN switches, and routers.

A repeater is a physical layer device used to interconnect the media segments of an extended network. A repeater essentially enables a series of cable segments to be treated as a single cable. Repeaters receive signals from one network segment and amplify, retime, and retransmit those signals to another network segment. These actions prevent signal deterioration caused by long cable lengths and large numbers of connected devices. Repeaters are incapable of performing complex filtering and other traffic processing. In addition, all electrical signals, including electrical disturbances and other errors, are repeated and amplified. The total number of repeaters and network segments that can be connected is limited due to timing and other issues. Figure 6 illustrates a repeater connecting two network segments.

A hub is a physical-layer device that connects multiple user stations, each via a dedicated cable. Electrical interconnections are established inside the hub. Hubs are used to create a physical star network while maintaining the logical bus or ring configuration of the LAN. In some respects, a hub functions as a multiport repeater.

A LAN extender is a remote-access multilayer switch that connects to a host router. LAN extenders forward traffic from all the standard network-layer protocols (such as IP, IPX, and AppleTalk), and filter traffic based on the MAC address or network-layer protocol type. LAN extenders scale well because the host router filters out unwanted broadcasts and multicasts. LAN extenders, however, are not capable of segmenting traffic or creating security firewalls. Figure 7 illustrates multiple LAN extenders connected to the host router through a WAN.

Introduction to TCP/IP